Table completeness shoes.

All of us in choosing the next new pair of boots, shoes draw the most direct attention to the material from which it is made, whether natural or artificial materials, the availability of accessories (Velcro fasteners, laces, zippers, decorative items), aesthetic appearance.However, not every shoe sits perfectly suitable size in the leg and has to fit the person.

no secret that if the shoe man picked up correctly, it will slide off, or vice versa, press (and this factor can lead to circulatory problems).With what it can be connected?Of course, it all depends on each particular model, domestic or foreign manufacturer.And that each of us means by size?Is it only the length of the foot?After all, in addition to this figure, the length of the foot, there is another term that is peculiar to the footwear industry, is the fullness of the shoe (Table fullness will be given below).Unfortunately, this concept is not often we come across, and many did not hear about it.However, it is also based at obuvki fitting,

especially if human foot wide or vice versa narrow.What does this option?Why is it needed?What is the fullness of the table of shoes?These and other questions will try to answer in this article.

What is the fullness of shoes?

This measure girth of the foot in the place where the bone (this part of the foot is considered the most wide forefoot).The indicator of completeness of footwear depends on the group of blocks which are divided by age and sex.Table completeness shoe detail in GOST 3927-88.Today, however, not all manufacturers are turning to the state standards, as well as, and often do not specify this option on your product.It is believed that if completeness is not specified, it corresponds to the average (normal) value.In addition, many companies specialize in the production and release of a particular shoe completeness (very narrow, narrow, normal, broader medium, wide).This indicator is especially important for sports equipment.These include skates, ski boots and other sports shoes.

designation completeness

This figure indicated in the alphanumeric equivalent.Digital is characteristic of Russia and European countries.For the UK and the US completeness of footwear (table will be shown below) - this letter (in the Latin alphabet - A, B, C, D, F at intervals of 5 mm) option.In our country, according to the conventional standards applied gradation 1-12 with 4-mm intervals.The difference between the lowest and the highest rate can be as much as 5 cm. In European countries, the completeness varies between 1-8 in steps of 5 mm.

Some simple rules for determining the completeness

To determine the proper fullness of your foot shoe, you can resort to a simple formula or online applications.Is it your parameters will give you the option desired (it is quite fast and convenient way).Also for clarity, the assistant may be the fullness of the table of shoes.Now, first things first.

First we need to figure out the length (the most protruding points) and width (at the widest part of the ledge toe) of the foot (in mm).Measurements shall be made for each foot separately, ideally in the evening or at the end of the working day and better on thin sock, since few bare foot wearing shoes, not counting summer options - sandals, clogs and others.Further, among the obtained results of length and width of the foot selects the largest.

formula for determining the completeness of boots, shoes

This formula will help determine the completeness of the required measure of shoes as a man and a woman, and it looks as follows:

W = 0,25hV - 0,15hS - A,

where W - indicator of completeness;

B - width (girth) of the foot;

C - foot length;

A - coefficient figure that has a constant value: 16 - for women's shoes size range 33,5-40 corresponding 21-27,5 cm, and 17 - for men's shoes size range 38,5-44,5 correspondingfeet in length 24,5-30,5 cm (shown in picture numbers A, the formula does not apply).

Table completeness shoe

ratio foot size and width of the foot demonstrates a table, which is acceptable to the spacing between adjacent rooms in a 5 mm.

size Completeness (lifting), mm
2 3 4 5 6 7 8 9 10
35 197 202 207 212 217 222 227 232 237
36 201 206 211 216 221 226 231 236 241
37 205 210 215 220 225 230 235 240 245
38 209 214 219 224 229 234 239 244 249
39 213 218 223 228 233 238 243 248 253
40 217 222 227 232 237 242 247 252 257
41 221 226 231 236 241 246 451 256 261
42 225 230 235 240 245 250 255 260 265
43 229 234 239 244 249 254 259 264 269
44 233 238 243 248 253 258 263 268 273
45 237 242 247 252 257 262 267 272 277
46 241 246 251 256 261 266 271 276 281
47 245 250 255 260 265 270 275 280 285
48 249 254 259 264 269 274 279 284 289

According to the table, index6 fullness - a measure of the completeness of the normal stop.Indicators 2-5 already characterize the foot middle, and 7 and then - broader medium, wide, full, very broad.

Table fullness of women's shoes is somewhat different from men's.The difference is the same value, that is, the number 1 corresponds to the fullness of women's shoes in men figure 2;number 2 in women the corresponding figure for men 3, etc.

American system of establishing the completeness of shoes

As mentioned above, in the United States has its own system, through which the fullness is indicated shoes.Table (United States), below - a visual confirmation.

alphanumeric designation completeness

(for female /

men's shoes)
Fullness stops for women's shoes Fullness foot for men's shoes
4A (AAAA, as well as the SS (super slim)) Very thin -
3A (AAA or S (slim)) Fine very narrow
2A (AA or N (narrow)) narrow very narrow
A - narrow
B (M (medium) / N (narrow)) Normal slightly narrower normal

C (W (wide) / N (narrow))

Slightly wider than normal slightly narrower normal

D (double wide / M (medium))

Wide Normal average

E (WWW, 3W (triple wide)/ W))

Very broad Wide
2E (EE, WW, 2W) - Very broad
3E (EEE, WWW, 3W) - very wide
4E (EEEE, WWWW, 4W) - Very broad

few words about the fullness of children's shoes

few words I want to give children.For them, the notion of an acceptable "fullness of children's shoes."The table is given in 3927-88 to generally accepted standards, unfortunately, somewhat outdated and acceleration of today's children, who grew up in the form of their Soviet peers - a clear proof of that.Self-respecting manufacturers of children's shoes are currently conducting various studies and mass measurement of children's feet to accurately recreate the desired block.In addition, they are uncomplicated method of manufacture of shoes with accessories - Velcro, laces, buckles.This hardware allows to regulate the parameters of the completeness index of children's feet.Therefore, before any purchase is better than once to try shoes, not to make the wrong choice.